User Tools

Site Tools


electronic_component_testing_cheatsheet

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electronic_component_testing_cheatsheet [2022/03/02 22:33]
sausage [Capacitors]
electronic_component_testing_cheatsheet [2024/05/19 04:40] (current)
sausage [MOSFETs]
Line 143: Line 143:
 Positive probe to Source, and Negative probe to Drain should show something like 0.5V and this cannot be cleared using your finger across the terminals. Positive probe to Source, and Negative probe to Drain should show something like 0.5V and this cannot be cleared using your finger across the terminals.
  
-Of course, MOSFETs ​to vary, so check your datasheet (a topic for another day).+Of course, MOSFETs ​do vary, so check your datasheet (a topic for another day).
  
 ---- ----
Line 208: Line 208:
  
 ===== Transformers ===== ===== Transformers =====
 +
 +<WRAP center round alert 90%>
 +Transformer voltages can be very dangerous. This section assumes there is no power and the transformer is removed from the circuit.
 +</​WRAP>​
 +
 +
 Transformers are a whole can of worms (actually a can of iron and copper), so I won't go into great detail here. I'll just outline the regular steps you can take for sanity testing a transformer. Transformers are a whole can of worms (actually a can of iron and copper), so I won't go into great detail here. I'll just outline the regular steps you can take for sanity testing a transformer.
  
Line 256: Line 262:
  
 A massive thanks to Wayne@WaynesWorld,​ Andrew V and Keystone for proofing this article. Really appreciate it. A massive thanks to Wayne@WaynesWorld,​ Andrew V and Keystone for proofing this article. Really appreciate it.
 +
 +
 +===== Coming Next =====
 +PNP transistors :: Gas Discharge Tubes
electronic_component_testing_cheatsheet.1646260405.txt.gz ยท Last modified: 2022/03/02 22:33 by sausage