User Tools

Site Tools


ssd1315

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ssd1315 [2019/04/25 13:33]
sausage
ssd1315 [2019/05/03 10:32] (current)
sausage
Line 1: Line 1:
-====== ​SSD 1306 oLED Module ​for the Pi1541 ======+====== ​SSD1306 and SSD1315 ​oLED Modules ​for the Pi1541 ======
  
 As mentioned in my [[pi1541|previous article]], while building the [[https://​cbm-pi1541.firebaseapp.com|Pi1541]],​ I had a lot of difficulty getting the oLED module to work. As mentioned in my [[pi1541|previous article]], while building the [[https://​cbm-pi1541.firebaseapp.com|Pi1541]],​ I had a lot of difficulty getting the oLED module to work.
Line 56: Line 56:
  
 Restarted the Pi1541. Guess what? It worked beautifully! The external screen no longer showed any output, and the oLED now took over and I could use it to select a D64 image. Restarted the Pi1541. Guess what? It worked beautifully! The external screen no longer showed any output, and the oLED now took over and I could use it to select a D64 image.
 +
 +{{ :​wiki:​ssd1306.jpg?​nolink |}}
  
 And the amusing part of the tale? I swapped out the SSD1306 with the SSD1315, restarted, and  it works too. So it was just me all the way along. And the amusing part of the tale? I swapped out the SSD1306 with the SSD1315, restarted, and  it works too. So it was just me all the way along.
  
 +{{ :​wiki:​ssd1315.jpg?​nolink |}}
  
 ===== Conclusion ===== ===== Conclusion =====
Line 65: Line 68:
  
   - If you built an Option B Pi1541 and chose the same Bus selection that I did (Bus 0), the above option.txt config items will work for you.   - If you built an Option B Pi1541 and chose the same Bus selection that I did (Bus 0), the above option.txt config items will work for you.
-  - You can use an SSD1315 as a 100% compatible replacement for the SSD1306 (but still call it ssd1306_128x64 in your config).+  - You can use an SSD1315 as a 100% compatible replacement for the SSD1306 (but still call it ''​ssd1306_128x64'' ​in your config).
   ​   ​
 And I think I'll stick with the SSD1315. I prefer the blue/yellow colours rather than monochrome white. And I think I'll stick with the SSD1315. I prefer the blue/yellow colours rather than monochrome white.
  
ssd1315.txt ยท Last modified: 2019/05/03 10:32 by sausage