User Tools

Site Tools


start

ESP32 with SSD1306 oLED display libraries

There's a lot of articles out there already on using these little 128×64 oLED monochrome displays with an ESP32 or with an Arduino board.

The go-to library for working with oLED displays appears to be Adafruit's SSD1306 library judging by the amount of articles written on it. This one is packed with features while being easy to use (but there are others!).

Read Article


Charlieplexing LEDs on the ESP32

The ESP32 has a stack of GPIO pins allowing you to attach a whole bunch of LEDs. But it's a neat practice to try using fewer pins with several LEDs using Charlieplexing. There's quite a few things you can learn along the way.

Read Article


ESP32 From Scratch

This guide will show you how to quickly set up an ESP32, placement onto a breadboard, wiring, the software, and finally sending code to it.

Read Article


Space Capsule Hotel Adventure

In February, myself and a couple of mates from work stayed at the Space Capsule Hotel in Sydney. Some thought what we were doing was dreadful/unconventional but we were keen to check it out nonetheless.

Once inside, there really is an illusion of being inside the sleeping cabin of some ship on route to mars.

Read Article


Setting up a minimal Hugo website

I discovered a most excellent thing recently for developing websites: Hugo. More truthfully, a friend got me onto it. At first I couldn't see the point of something that generates static pages from source.

Read Article


Oscillators on the PIC16F1455

Oscillators on a PIC can be a bit of a minefield to understand. Especially learning to read through a datasheet. So it can be a little daunting just to get a baseline start.

Hopefully I can help here.

Read Article


Minimum setup for a PIC16F1455 on a Breadboard + PICkit3

If you need a quick setup for the PIC16F1455, fast wiring and code to check output from a pin, this article is for you.

Read Article


FPGA Verilog simulation using GTKWave on the iCE40-feather

One of the nice things about working with FPGAs and Verilog is the array of open source tools and development boards that are available.

Our aim is to take a verilog file, a testbench and simulate it using Icarus Verilog / GTKWave.

Read Article


How to remove harvesting from a new Windows 10 instance

Microsoft has a sea of settings that have their best interests at heart. The biggest one being Cortana, and placing ads on the lock screen.

When receiving a new laptop or PC that has Windows 10 installed, there are a number of things that you can do to shut Microsoft out.

Read Article


Single Optional Argument for a LaTeX Macro

I recently needed to create a new LaTeX macro for a User manual. The macro was to output a defined character, but in a colour specified by the author. Therefore, I needed a macro that accepted a single optional argument.

Read Article


Simple start with WebAssembly/Emscripten and C/C++

I am really excited by this technology. In many aspects, it's a return to where I started, assembly coding on 8-bit and 16-bit machines. And it's a shot in the arm for the browser, opening up many new possibilities for frontend web development.

Read Article


Minimum setup for a PIC32MX270F256B on a Breadboard + PICkit3

My first experiments with PIC Microcontrollers was on the PIC32MX170F256B. But after discovering that there was no USB module on that controller, I then purchased a PIC32MX270F256B which did have one.

This article serves as a reminder for the minimum setup for this microcontroller.

Read Article


SSD1306 and SSD1315 oLED Modules for the Pi1541

As mentioned in my previous article, while building the Pi1541, I had a lot of difficulty getting the oLED module to work.

I blamed it on the fact I had accidentally purchased an SSD1315 instead of an SSD1306.

Read Article


Building the Pi1541

I first heard about the Pi1541 created by Steve White on Chicken Lips Radio. There had been other solutions in the past for hooking up an SD card to a C64/128 but nothing for the average hacker that would fully emulate a 1541 or daily chain to another real 1541.

Discovering that this project ran bare metal on the Raspberry Pi without any underlying OS was impressive to say the least, exactly what I was hoping someone would eventually produce.

I figured I could build this on perf board easily enough.

Read Article

start.txt ยท Last modified: 2020/09/25 03:28 by sausage