User Tools

Site Tools


electronic_component_testing_cheatsheet

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electronic_component_testing_cheatsheet [2022/03/02 07:53]
sausage [MOSFETs]
electronic_component_testing_cheatsheet [2022/03/02 07:53]
sausage [MOSFETs]
Line 121: Line 121:
 For MOSFETs, you'll need to search for your part to identify which pins are the Gate, Drain and Source pins. For MOSFETs, you'll need to search for your part to identify which pins are the Gate, Drain and Source pins.
  
-Remove from the PCB and place you finger on all three pins for a moment to de-charge the MOSFET. MOSFETs have a little capacitance in them which is handy for the test. +Remove from the PCB and place your finger on all three pins for a moment to de-charge the MOSFET. MOSFETs have a little capacitance in them which is handy for the test. 
  
 Switch to diode setting. Switch to diode setting.
electronic_component_testing_cheatsheet.txt ยท Last modified: 2024/05/19 04:40 by sausage