User Tools

Site Tools


panasonic_sa_pt170_repair

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

panasonic_sa_pt170_repair [2021/05/24 12:25]
sausage created
panasonic_sa_pt170_repair [2021/05/25 11:17] (current)
sausage
Line 49: Line 49:
 The issue was, I didn't record which way it went on. And even if I did, I'd since sneezed or knocked the container the diode sat on, and it flew away in the breeze. ​ The issue was, I didn't record which way it went on. And even if I did, I'd since sneezed or knocked the container the diode sat on, and it flew away in the breeze. ​
  
-The service manual indicated that the D5899 diode was a MA2J11100L, and using the datasheet for that part, I found that a 1m4148 ​would be a suitable replacement. But not being a surface mount component, I had to be a little creative in soldering this diode onto the pad.+The service manual indicated that the D5899 diode was a MA2J11100L, and using the datasheet for that part, I found that a 1n4148 ​would be a suitable replacement. But not being a surface mount component, I had to be a little creative in soldering this diode onto the pad. 
 + 
 +{{ :​repairs:​sapt170:​panasonic-dvd-diode.jpg?​direct |}}
  
 This done, I hooked up the boards again to try the unit. This done, I hooked up the boards again to try the unit.
panasonic_sa_pt170_repair.1621859100.txt.gz · Last modified: 2021/05/24 12:25 by sausage