Differences

This shows you the differences between two versions of the page.

--- feathers2_apa102 [2024/04/03 02:21]
sausage [The initialisation code]
+++ feathers2_apa102 [2024/04/04 21:34] (current)
sausage [Setting up an ESP32-S2 project]
@@ Line 1: / Line 1: @@
-====== FeatherS2 ESP32-S2 APA102 ======
+====== ESP32-S2 and the APA102 RGB LED ======
 {{ ::esp32s2:feathers2.jpg?direct&400|}}
@@ Line 38: / Line 38: @@
 We now have a build folder where our firmware will be built.
-We have to make two settings in our menuconfig to ensure our firmware does not crash:
+We to make a change in our menuconfig to ensure we can get debug information through USB:
   idf.py menuconfig
@@ Line 208: / Line 208: @@
 The LED won't come on? There are a number of things to re-check:
-  - Ensure USB CDC is set in the menuconfig or the board firmware will fail.
+  - Firmware may have crashed. Ensure USB CDC is set in the menuconfig.
   - Ensure RGB_DATA_PIN is set to mosi_io_num and RGB_CLK_PIN to sclk_io_num. Check it's not the wrong way around.
   - Ensure pin 21 is on to supply power.